HP Stream 14-ax000 Maintenance and Service Guide - Page 46

Phillips PM2.5×4.0 screws, The display hinges are included in the Display Hinge Kit

Page 46 highlights

a. Remove the two Phillips PM2.0×3.0 screws (1) on the top of the hinges. b. Remove the four Phillips PM2.5×2.5 screws (2) on the outside bottom of the hinges and the two Phillips PM2.5×4.0 screws (3) at the inside bottom of the hinges. c. Remove the display hinges (4). The display hinges are included in the Display Hinge Kit, spare part number 905560-001. 8. If it is necessary to replace the display panel cable: a. Release the display panel cable from the retention clips (1) and channel built into the left side of the display back cover. 38 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69

a.
Remove the two Phillips PM2.0×3.0 screws
(1)
on the top of the hinges.
b.
Remove the four Phillips PM2.5×2.5 screws
(2)
on the outside bottom of the hinges and the two
Phillips PM2.5×4.0 screws
(3)
at the inside bottom of the hinges.
c.
Remove the display hinges
(4)
.
The display hinges are included in the Display Hinge Kit, spare part number 905560-001.
8.
If it is necessary to replace the display panel cable:
a.
Release the display panel cable from the retention clips
(1)
and channel built into the left side of
the display back cover.
38
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts