HP Surestore Tape Library Model 10/180 Web-Based Library Administrator Help - Page 16

Drive SCSI ID, Drive States, Drive Type, Element ID, Ethernet Address, Expired Status, Fast Load,

Get HP Surestore Tape Library Model 10/180 PDF manuals and user guides View all HP Surestore Tape Library Model 10/180 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Drive SCSI ID The SCSI address for the drive. Drive States Examples of valid drive states are: Status Message INIT Required Not Connected Drive Empty Unknown Explanation You must initialize this drive. This drive is not connected to a SCSI bus. There are no cartridges in this drive. The library does not recognize the type of drive in this location. Drive Type Valid drive types are: é DLT 8000 é 9840 é LTO Ultrium Element ID The element is a location or component inside the library. The element ID (or address) directs the robotic arm. The robotic arm responds to the SCSI element ID (or address). Ethernet Address An Ethernet address is a unique number that is pre-assigned to the library. This address cannot be changed. Expired Status Cleaning cartridges have a limited life span. After multiple uses, a cleaning cartridge must be replaced and disposed of at your site. Fast Load Fast Load adjusts the robot's timing during cartridge mount operations. Valid choices are: é Enabled: When enabled, the robot loads a tape into a drive, and then immediately performs its next task. It does not wait for the tape drive to complete its mounting cycle. é Disabled: When disabled, the robot waits at the drive location until the tape is fully mounted before beginning its next task. Note: Some client software does not support the Fast Load feature. Consult your System Administrator before enabling this feature. Firmware

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
Drive SCSI ID
The SCSI address for the drive.
Drive States
Examples of valid drive states are:
Status Message
Explanation
INIT Required
You must initialize this drive.
Not Connected
This drive is not connected to a SCSI bus.
Drive Empty
There are no cartridges in this drive.
Unknown
The library does not recognize the type of drive in this location.
Drive Type
Valid drive types are:
é
DLT 8000
é
9840
é
LTO Ultrium
Element ID
The element is a location or component inside the library.
The element ID (or address) directs the robotic arm. The robotic arm responds to the SCSI element ID (or
address).
Ethernet Address
An Ethernet address is a unique number that is pre-assigned to the library. This address cannot be changed.
Expired Status
Cleaning cartridges have a limited life span. After multiple uses, a cleaning cartridge must be replaced and
disposed of at your site.
Fast Load
Fast Load adjusts the robot’s timing during cartridge mount operations.
Valid choices are:
é
Enabled:
When enabled, the robot loads a tape into a drive, and then immediately performs its next task. It
does not wait for the tape drive to complete its mounting cycle.
é
Disabled:
When disabled, the robot waits at the drive location until the tape is fully mounted before
beginning its next task.
Note: Some client software does not support the Fast Load feature. Consult your System Administrator
before enabling this feature.
Firmware