HP Vectra VE 5/xxx HP Vectra VE 5/xx Series 2 PC Familiarization Guide - D4000 - Page 9

To see the tests performed during the POST, press [ESC] when the HP Vectra logo appears and the display will switch to text mode. In this mode, a summary configuration screen will be displayed at the end of the POST. Pressing the PAUSE/BREAK key at any time will allow you to inspect the screen contents. Press any key to resume. SETUP Program The HP Vectra VE 5/xx series 2 PC has an integrated SETUP program. SETUP is started by pressing [F2] when the message Setup=F2 appears during the POST. Integrated Video Controller All models feature an integrated 64-bit PCI video controller (Cirrus Logic 5436) with 1 MB DRAM video memory as standard, upgradable to 2 MB (refer to "Installing Video Memory" in chapter 2). All models are DDC-1 compliant. This allows the PC to automatically configure for the optimum video settings (such as maximum refresh rate) when a DDC-1 compliant display is connected. NOTE Video modes incorporating an 85 Hz refresh rate are only available on HP Vectra VE 5/xx Series 2 PCs with System BIOS versions GU 07.01 (featuring Video BIOS version 1.10) and later. Windows 3.1x Video Resolutions Resolution 640 x 480 800 x 600 1024 x 768 1280 x 1024 640 x 480 800 x 600 1024 x 768 1280 x 1024 Number of colors 16, 256, 64K,16M 16, 256 64K 16 256 16 16, 256, 64K, 16M 16 256, 64K, 16M 16 256, 64K 16 256 Refresh Rate (Hz) 60, 72, 75, 85 56, 60, 72, 75 56, 60 i43, 60, 70, 75 i43, 60, 70, 85 i43 60, 72, 75, 85 56, 60, 72, 75 56, 60, 72, 75, 85 i43, 60, 70, 75 i43, 60, 70, 75, 85 i43 i43, 60, 72, 75 Memory 1 MB 2 MB