HP Vectra VEi8 HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G
HP Vectra VEi8 Manual
View all HP Vectra VEi8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Vectra VEi8 manual content summary:
- HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 1
IBM Token-Ring 16/4 PCI Adapter Installation Guide - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 2
of this document may be photocopied, reproduced, or translated to another language without the prior written consent of Hewlett-Packard Company. Microsoft®, Windows® and MS-DOS® are registered trademarks of Microsoft Corporation. MMXTM is a trademark of Intel Corporation. Pentium® is a registered - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 3
Bios setup and set PnP OS field to NO. • How to change LAN card configuration if needed (Advanced users only) This is a general advisory on how to forcibly modify resources for ISA and PCI network cards. ISA cards: • For ISA network adapters, start the configuration tool provided in driver - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 4
General information to read before installing 2 Press F2 to go to CMOS setup. 3 Set PNP OS to NO and reserve IRQ 5. 4 Save settings and boot to applicable OS. - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 5
Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 6
Connecting to a Windows NT 3.51 Server 8 Remove the IBM diskette from the floppy drive and click on "YES" to restart the system when prompted. 9 Right-click on the "Network Neighborhood" icon and select "Properties". 10 Accept the default Network Protocols and the Primary Network Logon (Client for - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 7
Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 8
the IBM Token-Ring 16/4 PCI Adapter Connecting to a Windows NT 4.0 Server 9 Right-click on the "Network Neighborhood" icon and select "Properties". 10 Accept the default Network Protocols and the Primary Network Logon (Client for Microsoft Networks) as seen below and click on "OK". (If you - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 9
3.12 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 10
the IBM diskette from the floppy drive and click on "YES" to restart the system when prompted. 9 Insert the "Novell Client for Windows 95" CD in the CDROM Click on "Yes" to set the Preferred Server. (If you do not have the required information, contact your network administrator). 15 Click on " - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 11
4.11 Server system that supports IPX network protocol. • Novell Client for Windows 95 v2.5 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 12
IBM diskette from the floppy drive and click on "YES" to restart the system when prompted. 9 Insert the "Novell Client for Windows 95" CD in the CDROM 14 Click on "Yes" to set the Preferred Server. (If you do not have the required information, contact your network administrator). 15 Click on "Reboot - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 13
Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 14
" at the prompt to shut down and restart your computer for the new settings to take effect. 22 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 23 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 15
Windows NT 4.0 Service Pack 4 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 16
" at the prompt to shut down and restart your computer for the new settings to take effect. 22 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 23 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 17
Windows NT 4.0 Service Pack 4 media. • Novell NetWare 3.12 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 18
have the required information). 13 At the "Network Services:" prompt, accept default settings and click on "Next". 14 Click on "Next" to continue the network card installation. 15 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 19
7 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Novell NetWare 3.12 Server 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 20
Windows NT 4.0 Service Pack 4 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11B installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 11 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 21
have the required information). 13 At the "Network Services:" prompt, accept default settings and click on "Next". 14 Click on "Next" to continue the network card installation. 15 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT4 Workstation CD) in the dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 22
8 Installing the IBM Token-Ring 16/4 PCI Adapter Connecting to a Novell NetWare 4.11 Server 29 Install the Windows NT4 Service Pack 4 application to correct the error messages in the Event Viewer. 30 Install the Hewlett-Packard Soft-Power Down application once the Service Pack 4 has been installed. - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 23
NT 3.51 Service Pack 5 media. • Microsoft Windows NT 3.51 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS transfer protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 05 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 24
"IBM PCI Token Ring Adapter Driver" in the "Select OEM Option" dialog box, and click "OK". 12 Accept the default settings in the IBM PCI Token Ring Adapter dialog box by clicking "OK". 13 Choose the appropriate network protocols by clicking the check boxes in the "Windows NT Setup" dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 25
Windows NT 3.51 Service Pack 5 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 26
"IBM PCI Token Ring Adapter Driver" in the "Select OEM Option" dialog box, and click "OK". 12 Accept the default settings in the IBM PCI Token Ring Adapter dialog box by clicking "OK". 13 Choose the appropriate network protocols by clicking the check boxes in the "Windows NT Setup" dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 27
3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 28
"IBM PCI Token Ring Adapter Driver" in the "Select OEM Option" dialog box, and click "OK". 12 Accept the default settings in the IBM PCI Token Ring Adapter dialog box by clicking "OK". 13 Choose the appropriate network protocols by clicking the check boxes in the "Windows NT Setup" dialog box and - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 29
Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 30
on "OK". 13 Specify your User Name, Workgroup, and Computer Name in "Microsoft Windows Network Names" dialog box, and click on "OK". (The Drivers will now start to copy). 14 To complete the installation, remove the Intel diskette from the floppy drive and click on "Restart Computer" button in the - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 31
11 Server system that supports IPX network protocol. • NetWare Client for DOS and MS Windows v1.21 installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 32
begin installation. 12 When the installation is finished, remove the IBM Token Ring driver disk from the floppy drive and press to restart the system. 13 You may login to a server from the DOS prompt or load Windows for Workgroup v3.11 and use the "NetWare User Tools" from the - HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 33
- HP Vectra VEi8 | HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 34
IBM Token-Ring 16/4 PCI Adapter
Installation Guide