HP Vectra VEi8 HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 27

11 Installing the IBM Token-Ring 16/4 PCI Adapter Microsoft Windows NT 3.51 Workstation 11 Installing the IBM Token-Ring 16/4 PCI Adapter Microsoft Windows NT 3.51 Workstation Connecting to a Novell NetWare 4.11 Server Requirements • HP Vectra with Windows NT 3.51 Workstation. • IBM Token-Ring 16/4 PCI adapter and driver disk version 2.10. • Driver File: IBMTRP.SYS, version 2.22 • Microsoft Windows NT 3.51 Workstation media. • Microsoft Windows NT 3.51 Service Pack 5 media. • Novell NetWare 4.11 Server system that supports IPX network protocol. • Novell IntranetWare Client for Windows NT v4.11b installation media. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the IBM Token Ring PCI adapter into a PCI slot. 2 Connect network cable media to the IBM Token Ring PCI card. 3 Log into Windows NT with administrator privileges. 4 Open the "Network" icon in the "Control Panel" program group. 5 Click on "YES" in the "Network Settings" dialog box to install Windows NT Networking. 6 Insert the Windows NT 3.51Workstation CD in the CD-ROM drive. 7 Set the path to "D:\I386" (D:\ represents the CD-ROM drive with the Windows NT 3.51 CD) in the dialog-box of the Windows NT Setup window and click on "Continue".