HP Vectra VEi8 HP Vectra VEi7, IBM Token-Ring 16/4 PCI Adapter, Installation G - Page 29

12 Installing the IBM Token-Ring 16/4 PCI Adapter Microsoft Windows for Workgroups 3.11 12 Installing the IBM Token-Ring 16/4 PCI Adapter Microsoft Windows for Workgroups 3.11 Connecting to a Microsoft Windows NT 4.0 Server Requirements • HP Vectra with MS-DOS and MS-Windows for Workgroups 3.11. • IBM Token-Ring 16/4 PCI adapter and driver disk version 2.10. • Driver File: IBMTRP.386, version 3.11.3 • Microsoft Windows for Workgroups 3.11 media. • Microsoft Windows NT 4.0 Server system that supports NetBEUI, NWLink IPX/SPX Compatible Transport, and NWLink NetBIOS network protocols. Device Configuration Device Configuration Interrupt I/O Address Vectra Vli8 09 1400 Vectra VEi7 03 D800 Vectra VEi8 10 E400 Procedure 1 With the HP Vectra turned off, install the IBM Token Ring PCI adapter card into a PCI slot. 2 Connect network cable media to the IBM Token Ring card. 3 After Windows loads, open the "NETWORK" Program Group, and doubleclick on "Network Setup". 4 Click on the "Networks" button in the "Network Setup" dialog box. 5 Click on the "Install Microsoft Windows Network:" option, and click "OK". 6 Click on the "Drivers" button from the "Network Setup" dialog box, and click on "Add Adapter". 7 Click "OK" to accept the default choice of "Unlisted or Updated Network Adapter". 8 Type the path "A:\WFW" in the "Install Driver" dialog box, and then insert the IBM "PCI Token Ring Adapter NDIS Driver disk into the floppy drive, and click "OK".