HP Visualize c3000 hp Visualize c3600 UNIX workstations PA8600 upgrade instruc - Page 34
Reinserting PCI I/O Cards
![]() |
View all HP Visualize c3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
System Board Removal/Replacement Reinserting PCI I/O Cards NOTE Reinserting PCI I/O Cards Reference the PCI label in the system for correct installation procedure. CAUTION When installing a PCI I/O card, do not rock it from side to side, or the card may be damaged. CAUTION To ensure optimum system performance and prevent system damage, install all I/O cards into their original slots. Refer to the I/O slot numbers on the back of the workstation. Figure 2-14 1. Align the edges of the PCI card with its slot and firmly push down to connect the card to the system board. Visually inspect and confirm the connection between the I/O card and the system board. Installing the PCI Cards 2. Looking down on the PCI cards, replace the bulkhead screw for each PCI card. 34 Chapter 2
![](/manual_guide/products/hewlettpackard-visualize-b1000-hp-visualize-c3600-unix-workstations-pa8600-upgrade-instructions-a599790000-ff512be/34.png)