HP Visualize c3000 hp Visualize c3600 UNIX workstations PA8600 upgrade instruc - Page 42

Replacing the Left Side Panel

Get HP Visualize c3000 - Workstation PDF manuals and user guides View all HP Visualize c3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

System Board Removal/Replacement Replacing the Left Side Panel Replacing the Left Side Panel 1. Replace the left side panel by holding it an angle and inserting its top and bottom hinge hooks with their respective slots in the chassis. Swing the back edge of the panel toward the back of the workstation and press the panel firmly into place. Figure 2-22 Opened Side Panel Side-Panel Thumbscrew Hinge Slots 1 Side-Panel Hook 2 2. Replace the two T-15 Torx thumbscrews that secure the left side panel to the chassis. 3. For each of the two SCSI connectors on the rear wall of the chassis, replace either the external SCSI devices (if you had any such devices attached previously) or the appropriate terminator (if you didn't have any external devices attached). One or the other must be in place. 4. The LVD SCSI bus must be properly terminated. 42 Chapter 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
42
Chapter 2
System Board Removal/Replacement
Replacing the Left Side Panel
Replacing the Left Side Panel
1.
Replace the left side panel by holding it an angle and inserting its top
and bottom hinge hooks with their respective slots in the chassis.
Swing the back edge of the panel toward the back of the workstation
and press the panel firmly into place.
Figure 2-22
Opened Side Panel
2.
Replace the two T-15 Torx thumbscrews that secure the left side
panel to the chassis.
3.
For each of the two SCSI connectors on the rear wall of the chassis,
replace either the external SCSI devices (if you had any such devices
attached previously) or the appropriate terminator (if you didn’t have
any external devices attached). One or the other must be in place.
4.
The LVD SCSI bus must be properly terminated.
Side-Panel Thumbscrew
Side-Panel Hook
1
2
Hinge Slots