HP XP24000 HP Replication Adapter for VMware vCenter Site Recovery Manager Adm - Page 38

Username & password, Virtualization Adapter.

Page 38 highlights

• For an RMSRA20 configuration using local connection, enter the HORCM instance to connect to the RAID Manager instance via RMSRA20, specifying the following formats: Figure 26 Configure the virtualization adapter for local configuration ◦ Enter HORCMINST=X to connect to HORCMINST=X on the Windows Host. Enter Username & password as dummy. NOTE: If the array is set as the authentication mode command device, Enter Username & password (sraadmin) for the array user. Verify that the Array Manager summary screen shows SRA is the HP StorageWorks XP Virtualization Adapter. Figure 27 (page 39) shows a sample screen shot of the Array Manager summary screen. 38 Configuring SRM and P9000 (XP) disk array

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

For an RMSRA20 configuration using local connection, enter the HORCM instance to
connect to the RAID Manager instance via RMSRA20, specifying the following formats:
Figure 26 Configure the virtualization adapter for local configuration
Enter
HORCMINST=X
to connect to HORCMINST=X on the Windows Host. Enter
Username & password
as dummy.
NOTE:
If the array is set as the authentication mode command device, Enter
Username & password
(sraadmin) for the array user.
Verify that the Array Manager summary screen shows SRA is the HP StorageWorks XP
Virtualization Adapter.
Figure 27 (page 39)
shows a sample screen shot of the Array Manager summary screen.
38
Configuring SRM and P9000 (XP) disk array