HP Xw6600 HP Workstations - Second Xeon Processor Installation - Page 6
Caution - heatsink
 |
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. To install the processor: a. Remove the plastic cover from the processor. b. Align the notches in the processor base with the tabs on the socket. c. Seat the processor into the socket. Ensure that the processor is level with the socket. Figure 2 Installing the processor 3. Close the processor cover plate. Lightly press down on the processor cover plate while closing the socket lever. CAUTION: After installing the processor in the socket, do not power up the workstation without the heatsink attached. Damage to the processor or the processor socket may result. 6 Second Intel® Xeon® processor installation ENWW
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
 |
 |
2.
To install the processor:
a.
Remove the plastic cover from the processor.
b.
Align the notches in the processor base with the tabs on the socket.
c.
Seat the processor into the socket. Ensure that the processor is level with the socket.
Figure 2
Installing the processor
3.
Close the processor cover plate. Lightly press down on the processor cover plate while closing the
socket lever.
CAUTION:
After installing the processor in the socket, do not power up the workstation without
the heatsink attached. Damage to the processor or the processor socket may result.
6
Second Intel® Xeon® processor installation
ENWW