HP Z210 HP Workstations - CRU Dataport DX115 kit installation - Page 15
HP xw8000 and xw9000 computers, CAUTION
View all HP Z210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
HP xw8000 and xw9000 computers 1. Remove the front bezel from the computer. See Figure 14 Removing the front bezel on page 10. 2. Remove and discard the counter-sunk shipping screw at the side of the DX115 case. Figure 25 Removing the shipping screw 3. Lift and hold the drive release latch at the touch point (1) while sliding the DX115 case into the bay (2). When the front of the drive is near its final position, release the latch, but continue to slide the drive inward until the latch closes and engages the drive. Figure 26 Installing the DX115 case 4. Install the M3 x 5mm screw (black) for each DX115 unit for shipping support. CAUTION: Failure to install the shipping screw might result in damage to the removable hard drive system. Figure 27 Installing the shipping support screw ENWW Step 2-Installing the DX115 case into the optical drive bay 15