HP Z600 HP Z600 and Z800 Workstations - Sliding rack-mount kit installation - Page 4
HP Z600 - Workstation - 6 GB RAM Manual
 |
UPC - 884962074053
View all HP Z600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
5. Remove the rear handle by using a T-15 Torx screwdriver to remove the long screw that secures the handle (1), and then remove the handle (2). Figure 1 Removing the rear handle 6. Lift the rear edge of the top cover at the center detente (1), press on the front edge of the top cover (2), and then slide the cover toward the rear of the system. Figure 2 Disengaging the top cover 4 Sliding rack-mount kit installation ENWW
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11
-
12
 |
 |
5.
Remove the rear handle by using a T-15 Torx screwdriver to remove the long screw that secures
the handle (1), and then remove the handle (2).
Figure 1
Removing the rear handle
6.
Lift the rear edge of the top cover at the center detente (1), press on the front edge of the top cover
(2), and then slide the cover toward the rear of the system.
Figure 2
Disengaging the top cover
4
Sliding rack-mount kit installation
ENWW