HP Z6100 HP Designjet Z6100 Printer Series - Setup Poster (60 inch) - Page 16

106 Unlock and remove the blue hub from the left end of the spindle. Keep the spindle horizontal. 107 Place one of the two rolls of paper that came with your printer in the middle of the take-up reel deflector. 108 Make sure that the black hub on the right side of the spindle is fully inserted into the roll of paper. (No gap should exist between the spindle hub and the roll.) 109 Slide the blue hub onto the spindle. Make sure that the blue hub is fully inserted into the roll of paper (no gap should exist between the hub and the roll), and then lock the hub. 2 1 2 1 110 With the blue hub on the left, lower the spindle into the printer. 111 From the front panel, select the paper icon and then press the OK button. 112 Select Load roll and then press the OK button. Page 16 113 Wait until this message appears on the front panel.