HP dx2818 Hardware Reference Guide - dx2818 Microtower Model - Page 41
CAUTION, Installing the Hard Drive Cage
View all HP dx2818 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
3. Connect the power cable (1) and data cable (2) to the back of the hard drive. Figure 2-31 Connecting the Hard Drive Cables CAUTION: Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A sharp bend can break the internal wires. 4. Place the hard drive cage into the chassis (1), then slide it down toward the bottom of the chassis until it locks into place (2). Figure 2-32 Installing the Hard Drive Cage ENWW Installing Additional Drives 35
3.
Connect the power cable (1) and data cable (2) to the back of the hard drive.
Figure 2-31
Connecting the Hard Drive Cables
CAUTION:
Never crease or bend a SATA data cable tighter than a 30 mm (1.18 in) radius. A
sharp bend can break the internal wires.
4.
Place the hard drive cage into the chassis (1), then slide it down toward the bottom of the chassis
until it locks into place (2).
Figure 2-32
Installing the Hard Drive Cage
ENWW
Installing Additional Drives
35