Hikvision DS-2CD2232-I5 User Manual - Page 140
Road Traffic
View all Hikvision DS-2CD2232-I5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
User Manual of Network Camera Chapter 9 Road Traffic Purpose: Vehicle Detection and Mixed-traffic Detection are available for the road traffic monitoring. In Vehicle Detection, the passed vehicle can be detected and the picture of its license plate can be captured; besides, the vehicle color, vehicle logo and other information can be recognized automatically. In Mixed-traffic Detection, the pedestrian, motor vehicle and non-motor vehicle can be detected, and the picture of the object (for pedestrian / non-motor vehicle / motor vehicle without license plate) or license plate (for motor vehicle with license plate) can be captured. You can send alarm signal to notify the surveillance center and upload the captured picture to FTP server. Note: Road traffic function varies according to different camera models. Steps: Configuring the Detection Settings 1. Select the detection type from the list. Vehicle Detection and Mixed-traffic Detection are selectable. Note: Reboot the device to activate the new settings when switching the detection type of road traffic. 2. Check the checkbox of Enable the enable the selected detection function. 3. Select the lane number in the corresponding dropdown list. Up to 4 lanes are selectable. 4. Click and drag the lane line to set its position, or click and drag the line end to adjust the length and angle of the line. 5. Adjust the zoom ratio of the camera so that the size of the vehicle in the image is close to that of the red frame. Only the position of red frame is adjustable. Note: Only 1 license plate can be captured at one time for each lane. 6. Select a Province/State Abbreviation in the drop down list when the attribution of license plate cannot be recognized. 7. Set the Arming Schedule for Vehicle Detection. 139