Hikvision DS-2CD2232-I5 User Manual - Page 32
Recording and Capturing Pictures Manually, Operating PTZ Control
View all Hikvision DS-2CD2232-I5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
User Manual of Network Camera / / / / / Click to select the third-party plug-in. Manually capture the picture. Manually start/stop recording. Audio on and adjust volume /Mute. Turn on/off microphone. Turn on/off digital zoom function. Turn on/off 3D positioning function. Note: The third stream and 3D positioning require the support of camera. 5.3 Recording and Capturing Pictures Manually In the live view interface, click on the toolbar to capture the live pictures or click to record the live view. The saving paths of the captured pictures and clips can be set on the Configuration > Local Configuration page. To configure remote scheduled recording, please refer to Section 7.2. Note: The captured image will be saved as JPEG file or BMP file in your computer. 5.4 Operating PTZ Control Purpose: In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom control of the camera. Before you start: To realize PTZ control, the camera connected to the network must support the PTZ function or a pan/tilt unit has been installed to the camera. Please properly set the PTZ parameters on RS-485 settings page referring to Section 10.8 RS-485 Settings. 5.4.1 PTZ Control Panel On the live view page, click to show the PTZ control panel or click to hide it. 31