Hikvision DS-2CD2232-I5 User Manual - Page 29
Customize the IPv4 address, the IPv4 Subnet Mask and the Default Gateway.
View all Hikvision DS-2CD2232-I5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
User Manual of Network Camera 1. Enter the TCP/IP configuration interface. Configuration> Advanced Configuration> Network> TCP/IP Or Configuration> Basic Configuration> Network> TCP/IP Figure 4-12 TCP/IP Settings 2. Select the NIC as wlan. 3. Customize the IPv4 address, the IPv4 Subnet Mask and the Default Gateway. The setting procedure is the same with that of LAN. If you want to be assigned the IP address you can check the checkbox to enable the DHCP. 28
User Manual of Network Camera
28
1.
Enter the TCP/IP configuration interface.
Configuration> Advanced Configuration> Network> TCP/IP
Or
Configuration> Basic Configuration> Network> TCP/IP
Figure 4-12
TCP/IP Settings
2.
Select the NIC as wlan.
3.
Customize the IPv4 address, the IPv4 Subnet Mask and the Default Gateway.
The setting procedure is the same with that of LAN.
If you want to be assigned the IP address you can check the checkbox to enable the
DHCP.