Hikvision DS-2CD2232-I5 User Manual - Page 40
Configuring Network Settings
View all Hikvision DS-2CD2232-I5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
User Manual of Network Camera 6.3 Configuring Network Settings 6.3.1 Configuring TCP/IP Settings Purpose: TCP/IP settings must be properly configured before you operate the camera over network. The camera supports both the IPv4 and IPv6. Both versions may be configured simultaneously without conflicting to each other, and at least one IP version should be configured. Steps: 1. Enter TCP/IP Settings interface: Configuration > Basic Configuration > Network > TCP/IP Or Configuration > Advanced Configuration > Network > TCP/IP Figure 6-6 TCP/IP Settings 2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings 39
User Manual of Network Camera
39
6.3
Configuring Network Settings
6.3.1
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera over
network. The camera supports both the IPv4 and IPv6. Both versions may be
configured simultaneously without conflicting to each other, and at least one IP
version should be configured.
Steps:
1.
Enter TCP/IP Settings interface:
Configuration > Basic Configuration >
Network > TCP/IP
Or
Configuration > Advanced Configuration >
Network > TCP/IP
Figure 6-6
TCP/IP Settings
2.
Configure the basic network settings, including the NIC Type, IPv4 or IPv6
Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings