Hikvision DS-2CD2232-I5 User Manual - Page 84
Configuring Alarm Input
View all Hikvision DS-2CD2232-I5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
User Manual of Network Camera 3. Set the video tampering area. Refer to Task 1 Set the Motion Detection Area in Section 6.6.1. 4. Click Edit to edit the arming schedule for video tampering. The arming schedule configuration is the same as the setting of the arming schedule for motion detection. Refer to Task 2 Set the Arming Schedule for Motion Detection in Section 6.6.1. 5. Check the checkbox to select the linkage method taken for the video tampering. Audible warning, notify surveillance center, send email and trigger alarm output are selectable. Please refer to Task 3 Set the Alarm Actions for Motion Detection in Section 6.6.1. 6. Click Save to save the settings. 6.6.3 Configuring Alarm Input Steps: 1. Enter the Alarm Input Settings interface: Configuration > Advanced Configuration> Basic Event > Alarm Input: 2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO (Normally Open) and NC (Normally Closed). Edit the name to set a name for the alarm input (optional). Figure 6-52 Alarm Input Settings 83