Hikvision DS-2CD2232-I5 User Manual - Page 83
Configuring Video Tampering Alarm
View all Hikvision DS-2CD2232-I5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
User Manual of Network Camera (3)Select the start time and the end time for the switch timing. (4)Select the area by clicking the area No. (5)Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area in the daytime. (6)Slide the cursor to adjust the sensitivity and proportion of object on the area for the selected area at night. (7)Set the arming schedule and linkage method as in the normal configuration mode. (8)Click Save to save the settings. 6.6.2 Configuring Video Tampering Alarm Purpose: You can configure the camera to trigger the alarm when the lens is covered and take some certain alarm response actions. Steps: 1. Enter the video tampering Settings interface: Configuration > Advanced Configuration > Basic Event > Video Tampering Figure 6-51 Video Tampering Alarm 2. Check Enable Video Tampering checkbox to enable the video tampering detection. 82