Hikvision DS-2CD2232-I5 User Manual - Page 99
Configuring Region Exiting Detection
View all Hikvision DS-2CD2232-I5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
User Manual of Network Camera Figure 6-64 Configuring Region Entrance Detection 6.6.14 Configuring Region Exiting Detection Purpose: Region exiting detection function detects people, vehicle or other objects which exit from a pre-defined virtual region, and some certain actions can be taken when the alarm is triggered. Note: Region exiting detection function varies according to different camera models. Steps: 1. Enter the Region Exiting Detection settings interface: Configuration> Advanced Configuration> Smart Event> Region Exiting Detection 2. Check the checkbox of Enable Region Exiting Detection to enable the function. 3. Select the region from the drop-down list for detection settings. 4. Click the Draw Area button to start the region drawing. 5. Click on the live video to specify the four vertexes of the detection region, and right click to complete drawing. 6. Click-and-drag the slider to set the detection sensitivity. Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the 98