Hikvision DS-2CD2D21G0/M-D/NF User Manual - Page 100
Configuring Alarm Output, Handling Exception
View all Hikvision DS-2CD2D21G0/M-D/NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
DS-2CD2D21G0/M-D/NF User Manual Configuring Alarm Output Figure 95, Alarm Output Settings 1. Enter the Alarm Output Settings interface: Configuration> Event > Basic Event > Alarm Output. 2. Select an alarm output channel in the Alarm Output drop-down list. You can also set a name for the alarm output (optional). 3. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual. The delay time refers to the duration that the alarm output remains in effect after an alarm occurs. 4. Click Arming Schedule to enter the Edit Schedule Time interface. The time schedule configuration is the same as the settings of the arming schedule for motion detection Refer to Task 2: Set the Arming Schedule for Motion Detection in Section 10.1.1. 5. You can copy the settings to other alarm outputs. 6. Click Save to save the settings. Handling Exception The exception type can be HDD full, HDD error, network disconnected, IP address conflicted, and illegal login to the cameras. UM DS-2CD2D21G0/M-D/NF 020319NA 99