Hikvision DS-2CD2D21G0/M-D/NF User Manual - Page 41
Configuring RS-232 Settings
View all Hikvision DS-2CD2D21G0/M-D/NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
DS-2CD2D21G0/M-D/NF User Manual Figure 38, Time Sync by NTP Server NOTE: If the camera is connected to a public network, you should use a NTP server that has a time synchronization function such as the server at the National Time Center (IP address: 210.72.145.44). If the camera is set in a customized network, NTP software can be used to establish an NTP server for time synchronization. 4. Configure the manual time synchronization. A. Check the Manual Time Sync. item to enable the manual time synchronization function. B. Click the icon to select the date, time from the pop-up calendar. C. (Optional) You can check Sync. with computer time item to synchronize the time of the device with that of the local PC. 5. Click Save to save the settings. Figure 39, Time Sync Manually Configuring RS-232 Settings The RS-232 port can be used in two ways: • Console: Connect a computer to the camera through the serial port. Device parameters can be configured by using software such as HyperTerminal. The serial port parameters must be the same as the camera serial port parameters. UM DS-2CD2D21G0/M-D/NF 020319NA 40