Hikvision DS-2CD2D21G0/M-D/NF User Manual - Page 96

Configuration > Storage > Schedule Settings> Capture > Capture Parameters

Get Hikvision DS-2CD2D21G0/M-D/NF PDF manuals and user guides View all Hikvision DS-2CD2D21G0/M-D/NF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 96 highlights

DS-2CD2D21G0/M-D/NF User Manual 5. Click Save to save the settings. NOTE: Time periods can't overlap. Up to eight periods can be configured for each day. Task 3: Set the Linkage Method for Motion Detection Check the checkbox to select the linkage method. Audible Warning, Send Email, Notify Surveillance Center, Upload to FTP/Memory Card/NAS, Trigger Channel, and Trigger Alarm Output are selectable. You can specify the linkage method when an event occurs. Figure 91, Linkage Method NOTE: The linkage methods vary by camera model. • Audible Warning: Trigger the audible warning locally (supported only by devices that have audio output). • Notify Surveillance Center: Send an exception or alarm signal to remote management software when an event occurs. • Send Email: Send an e-mail with alarm information to a user(s) when an event occurs. NOTE: To send the e-mail when an event occurs, refer to Section 7.2.3 to complete e-mail setup in advance. • Upload to FTP/Memory Card/NAS: Capture the image when an alarm is triggered and upload it to an FTP server. NOTE: Set the FTP address and the remote FTP server first. Refer to Section 7.2.2 Configuring FTP Settings for detailed information. - Go to Configuration > Storage > Schedule Settings> Capture > Capture Parameters page, enable the event-triggered snapshot, and set the capture interval and capture number. - The captured image can also be uploaded to an available SD card or network disk. - Trigger Channel: The video will be recorded when motion is detected. You have to set the recording schedule to realize this function. Please refer to Section 11.1 for detailed information. - Trigger Alarm Output: Trigger one or more external alarm outputs when an event occurs. UM DS-2CD2D21G0/M-D/NF 020319NA 95

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA
95
5.
Click
Save
to save the settings.
NOTE:
Time periods can’t overlap. Up to eight periods can be configured for each day.
Task 3: Set the Linkage Method for Motion Detection
Check the checkbox to select the linkage method.
Audible Warning
,
Send Email
,
Notify Surveillance Center
,
Upload to FTP/Memory Card/NAS
,
Trigger Channel
, and
Trigger Alarm Output
are selectable. You can specify the
linkage method when an event occurs.
Figure 91, Linkage Method
NOTE:
The linkage methods vary by camera model.
•
Audible Warning:
Trigger the audible warning locally (supported only by devices that have audio output).
•
Notify Surveillance Center:
Send an exception or alarm signal to remote management software when an event
occurs.
•
Send Email:
Send an e-mail with alarm information to a user(s) when an event occurs.
NOTE:
To send the e-mail when an event occurs, refer to Section 7.2.3 to complete e-mail setup in advance.
•
Upload to FTP/Memory Card/NAS:
Capture the image when an alarm is triggered and upload it to an FTP server.
NOTE:
Set the FTP address and the remote FTP server first. Refer to Section 7.2.2 Configuring FTP Settings
for detailed information.
-
Go to
Configuration > Storage > Schedule Settings> Capture > Capture Parameters
page, enable the
event-triggered snapshot, and set the capture interval and capture number.
-
The captured image can also be uploaded to an available SD card or network disk.
-
Trigger Channel: The video will be recorded when motion is detected. You have to set the recording schedule
to realize this function. Please refer to
Section 11.1
for detailed information.
-
Trigger Alarm Output: Trigger one or more external alarm outputs when an event occurs.