Hikvision DS-2CD2D21G0/M-D/NF User Manual - Page 145
Add a Lock, Lock Switch, Unlock, HDD Management, Format, Remove the Lock, Password Settings, Arming
View all Hikvision DS-2CD2D21G0/M-D/NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
DS-2CD2D21G0/M-D/NF User Manual Figure 132, R/W Lock Setting • Add a Lock A. Set the Lock Switch to ON. B. Input the password. C. Click Save to save the settings. • Unlock - If you use the memory card on the camera that locked it, unlocking will be done automatically and no unlocking procedures are required on the part of users. - If you use the memory card (with a lock) on a different camera, you can go to the HDD Management interface to unlock the memory card. Select the memory card, and click the Unlock button shown next to the Format button, then input the correct password to unlock it. NOTES: » The memory card can only be read from and written to when it is unlocked. » If the camera that added a lock to the memory card is restored to the factory settings, you can go to the HDD Management interface to unlock the memory card. • Remove the Lock A. Set the Lock Switch to OFF. B. Input the correct password in the Password Settings text field. C. Click Save to save the settings. 4. Set the Arming Schedule and Linkage Method to receive notification when the health status of the memory card is other than good. Refer to Task 2: Set the Arming Schedule for Motion Detection and Task 3: Set the Linkage Method for Motion Detection in Section 10.1.1. 5. Click Save to save the settings. UM DS-2CD2D21G0/M-D/NF 020319NA 144