Hikvision DS-2CD2D21G0/M-D/NF User Manual - Page 69
Wireless Dial
View all Hikvision DS-2CD2D21G0/M-D/NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
DS-2CD2D21G0/M-D/NF User Manual NOTE: » The verification code is required when you add the camera to the Hik-Connect app. » For more information about the Hik-Connect app, refer to the Hik-Connect Mobile Client User Manual. 3. You can use the default server address, or you can check the Custom checkbox on the right and input a desired server address. 4. Click Save to save the settings. Wireless Dial Purpose: Data stream of audio, video, and image can be transferred via a 3G/4G wireless network. NOTES: » The wireless dial function may not be supported by some camera models. » Cameras that support wireless dial do not support PPPoE. 1. Click Wireless Dial tab to enter the Wireless Dial configuration interface: Configuration > Network > Advanced Settings > Wireless Dial. 2. Check the checkbox to enable the wireless dial settings. 3. Configure the dial parameters. A. Select the dial mode from the drop-down list. Auto and Manual are selectable. If Auto is selected, you can set the arming schedule for dialing; If Manual is selected, you can set the offline time and manual dialing parameters. B. Set the access number, user name, password, APN, MTU, and verification protocol. You can also leave these parameters blank, and the device will adopt the default settings for dialing after other parameters are configured. C. Select the network mode from the drop-down list. Auto, 3G, and 4G are selectable. If Auto is selected, the network selection priority is: 4G > 3G > Wired Network. D. Input the offline time if Manual is selected as the dial mode. E. Input the UIM Number (Mobile Phone Number). F. Click the Edit button to set the arming schedule if Auto is selected as the dial mode. G. Click Save to save the settings. 4. View the dial status. A. Click the Refresh button to view the dial status including real-time mode, UIM status, signal strength, etc. B. If Manual is selected as the dial mode, you can also manually connect/disconnect the wireless network. UM DS-2CD2D21G0/M-D/NF 020319NA 68