Hikvision DS-2CD2D21G0/M-D/NF User Manual - Page 27

DS-2CD2D21G0/M-D/NF User Manual EAP-PEAP: • User Name ― Enter the user name to present to the network • Password ― Enter the password of the network • PEAP Version ― Select the PEAP version used at the access point. • Label ― Select the label used by the access point. • EAPOL Version ― Select version (1 or 2) depending on the version used at the access point • CA Certificates ― Upload a CA certificate to present to the access point for authentication CAUTION! For your privacy and to better protect your system against security risks, we strongly recommend the use of strong passwords for all functions and network devices. The password should be something of your own choosing (using a minimum of eight characters, including at least three of the following categories: upper case letters, lower case letters, numbers and special characters) in order to increase the security of your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user. Easy Wi-Fi Connection with WPS function Purpose: The setting of the wireless network connection is never easy. To avoid the complex setting of the wireless connection you can enable the WPS function. WPS (Wi-Fi Protected Setup) refers to the easy configuration of the encrypted connection between the device and the wireless router. The WPS makes it easy to add new devices to an existing network without entering long passphrases. There are two modes of the WPS connection, the PBC mode and the PIN mode. NOTE: If you enable the WPS function, you do not need to configure the parameters such as the encryption type, and you don't need to know the key of the wireless connection. UM DS-2CD2D21G0/M-D/NF 020319NA 26