Hikvision DS-2CD2D21G0/M-D/NF User Manual - Page 33
Recording and Capturing Pictures Manually, Operating PTZ Control
View all Hikvision DS-2CD2D21G0/M-D/NF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
DS-2CD2D21G0/M-D/NF User Manual bottom of the Web page. 3. Click the button again to stop the function. NOTE: The pixel counter is supported only under the main stream and only one rectangle is supported. Recording and Capturing Pictures Manually In the live view interface, click on the toolbar to capture the live pictures or click to record the live view. The saving paths of the captured pictures and clips can be set on the Configuration > Local page. To configure remote scheduled recording, please refer to Section 6.1. NOTE: The captured image will be saved as a JPEG file or BMP file in your computer. Operating PTZ Control Purpose: In the live view interface, you can use the PTZ control buttons to realize pan/tilt/zoom control of the camera. NOTE: To realize PTZ control, the camera connected to the network must support the PTZ function or have a pan/tilt unit installed to the camera. Please properly set the PTZ parameters on RS-485 settings page (referr to Section 6.2.4 RS485 Settings). PTZ Control Panel • On the live view page, click next to the right side of the live view window to show the PTZ control panel and click to hide it. • Click the direction buttons to control the pan/tilt movements. Figure 32, PTZ Control Panel • Click the zoom/focus/iris buttons to realize lens control. UM DS-2CD2D21G0/M-D/NF 020319NA 32