Hitachi C12RSH User Guide - Page 56

English Gloves for handling saw blades (saw blades shall be carried in a holder wherever practicable) and rough material. 15. The operator is adequately trained in the use, adjustment and operation of the machine. 16. Refrain from removing any cut-offs or other parts of the workpiece from the cutting area whilst the machine is running and the saw head is not in the rest position. 17. Never use the slide compound miter saw with its lower guard locked in the open position. 18. Ensure that the lower guard moves smoothly. 19. Do not use the saw without guards in position, in good working order and properly maintained. 20. Use correctly sharpened saw blades. Observe the maximum speed marked on the saw blade. 21. Do not use saw blades which are damaged or deformed. 22. Do not use saw blades manufactured from high speed steel. 23. Use only saw blades recommended by HITACHI. Use of saw blade comply with EN847-1. 24. The saw blades should be from 290 mm to 305 mm external diameter ranges. 25. Select the correct saw blade for the material to be cut. 26. Never operate the slide compound miter saw with the saw blade turned upward or to the side. 27. Ensure that the workpiece is free of foreign matter such as nails. 28. Replace the table insert when worn. 29. Do not use the saw to cut other than aluminium, wood or similar materials. 30. Do not use the saw to cut other materials than those recommended by the manufacturer. 31. Blade replacement procedure, including the method for repositioning and a warning that this must be carried out correctly. 32. Connect the slide compound miter saw to a dust collecting device when sawing wood. 33. Take care when slotting. 34. When transporting or carrying the tool, do not grasp the holder. Grasp the handle instead of the holder. 35. Start cutting only after motor revolution reaches maximum speed. 36. Promptly cut OFF the switch when abnormality observed. 37. Shut off power and wait for saw blade to stop before servicing or adjusting tool. 38. During a miter or bevel cut the blade should not be lifted until it has stopped rotation completely. 39. During slide cutting operation, the saw must be pushed and slided away from the operator. 40. Take all the possibility of residual risks in cutting operation into your consideration, such as the laser radiation to your eyes, the inadvertent access to moving parts on slide mechanical parts on machine and so on. SPECIFICATIONS 0° Miter 45° Max. Cutting Capacity Height × Width Bevel Left 45° Right 45° Bevel (Left) 45° + Miter 45° Compound Bevel (Right) 45° + Miter (Left) 31° Bevel (Right) 45° + Miter (Right) 45° Saw Blade Dimensions (oD × iD × Thickness) Miter Cutting Angle Bevel Cutting Angle Compound Cutting Angle Bevel (Left) 0° - 45° Bevel (Right) 0° - 45° Voltage (by areas)* Power Input* No-Load Speed Machine Dimensions (Width × Depth × Height) Model Weight (Net) Digital Display Precision ±0.5° Maximum output Laser Marker (Iambda) Laser medium 105 mm × 312 mm 105 mm × 220 mm 68 mm × 312 mm 43 mm × 312 mm 68 mm × 220 mm 43 mm × 265 mm 43 mm × 220 mm 305 mm × 30 mm × 2.3 mm Right 0° - 57°, Left 0° - 46° Right and Left 0° - 45° Miter (Left) 0° - 45°, Miter (Right) 0° - 31° Miter (Right) 0° - 45°, Miter (Left) 0° - 31° (110 V, 230 V) 1520 W 4000 min-1 595 mm × 930 mm × 710 mm C12LSH C12RSH 30 kg 29 kg Yes No Po