Hitachi CP-X2 User Manual - Page 13

Remote control Changing the frequency of remote control signal The accessory remote control has the two choices on signal frequency Mode 1:NORMAL and Mode 2:HIGH. If the remote control does not function properly, attempt to change the signal frequency. In order to set the Mode, please keep pressing the combination of two buttons listed below simultaneously for about 3 seconds. (1) Set to Mode 1:NORMAL... MUTE and RESET buttons (2) Set to Mode 2:HIGH... MAGNIFY OFF and ESC buttons Please remember that the REMOTE FREQ. in the SERVICE item of the OPTION menu (42) of the projector to be controlled should be set to the same mode as the remote control. (2) COMPUTER/ VIDEO STORAGE SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 (1) POSITION MENU ESC ENTER RESET Using as a simple PC mouse & keyboard The enclosed remote control works as a simple mouse and keyboard of the PC, when the projector's USB port (B type) connects with the PC's USB port (A type) port via a mouse cable. USB port (1) HOME key: Press the HOME button. (2) END key: Press the END button. USB USB STORAGE (3) PAGE UP key: Press the PAGE UP buttoCnO.MPUTER IN1 COMPUTER IN2 DC 5V 0.5A AUDIO OUT (4) PAGE DOWN key: Press the PAGE DOWN button. (5) (6) Mouse left button: Move pointer: Use Press the the cursor EbNutTtSVoE-IVDnRIEDsOEb▲Ou,tKt▼on,. ◄ and ►. (7) ESC key: Press the ESC button. (8) Mouse right button: Press the RESET button. (1) (2) COMPUTER/ VIDEO STORAGE SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 AUDIO IN (3) (4) CAUTION ►Improper use of the simple mouse & keyboard function could damage your equipment. While using this function, please connUeScBtStThOiRsAGpErodUuSBct only to a PC. Be sure to check yoLAuNr PCD'sC 5mV a0.5nAuals before connecting this product to the PC. K (5) POSITION MENU ENTER ESC RESET COMP(U7T)ER IN S-VIDEO VIDEO (6) AUDIO OU (8) AUDIO IN NOTE • When the simple mouse & keyboard function of this product does not work correctly, please check the following. - When the mouse cable connects this projector with a PC having a built-in pointing device (e.g. track ball) like a notebook PC, open BIOS setup menu, then select the external mouse and disable the built-in pointing device, because the built-in pointing device may have priority to this function. - Windows 95 OSR 2.1 or higher is required for this function. And also this function may not work depending on the PC's configurations and mouse drivers. - You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally). - This function is activated only when the projector is working properly. This function is not available while the lamp is warming up (the POWER indicator flashes green), and while adjusting the volume and display, correcting for keystone, zooming in on the screen, using the BLANK function, or displaying the menu screen. 13