Hitachi CP-X2 User Manual - Page 54

MIU Menu MIU Menu (continued) Item SERVICE Description Selecting this item displays the SERVICE menu. Use the ▲/▼ buttons to select an item, and the ► or ENTER button on the remote control to perform the item. SERVICE REMOVE ALL REMOVE SD CARD REMOVE USB MIU RESTART REMOVE ALL, REMOVE SD CARD, REMOVE USB Choose one of the following items either "REMOVE ALL", "REMOVE SD CARD" or "REMOVE USB" that matches a media to be taken out, from projector, when you remove the SD Memory Card or USB memory. 4'/18'#.. ':'%76' %#0%'. 4'/18'5&%#4& ':'%76' %#0%'. 4'/18'75$ ':'%76' %#0%'. Use the ▲ button to perform the procedure to remove the media. EXECUTE ï CANCEL The "SUCCEED" message will be displayed when the media is ready to remove. If "FAILED" message is displayed, please retry remove process again a few minutes later. • When removing wireless network card, turn the projector off and unplug the power cord. • AS long as the media is ready to remove or no media is inserted, the "SUCCEED" message will be displayed whenever the removal procedure is performed. MIU RESTART Use the ▲ button to restart the network communication. The network communication will be cut off once and restarted. MIU RESTART EXECUTE CANCEL EXECUTE ï CANCEL • After selecting the EXECUTE, the MIU menu may not be controlled approximately 20 seconds. • If DHCP is ON, IP address may be changed. 54