Hitachi CP-X2 User Manual - Page 40

OPTION Menu OPTION Menu (continued) Item Description This item is to assign one of the following functions to MY BUTTON 1 and 2 on the remote control (5). Choose 1 or 2 on the MY BUTTON menu using the ◄/► button first. Then using the ▲/▼ buttons sets one of the following functions to the chosen button. • COMPUTER: Sets port to COMPUTER IN. • MIU: Sets port to MIU. • S-VIDEO: Sets port to S-VIDEO. • VIDEO: Sets port to VIDEO. • e-SHOT: Displays the e-SHOT menu (52). • INFORMATION: Displays a dialog of INPUT/MIU INFORMATION (42, 53). If a signal is found, the dialog is switched as below. INPUT INFORMATION  MIU INFORMATION  OFF MY BUTTON If no signal is found, the dialog is switched as below. MIU INFORMATION ó OFF • AUTO KEYSTONE EXECUTE: Performs automatic keystone distortion correction (32). • MY MEMORY: Loads one of adjustment data stored (26). When the current adjustment is not saved to memory a dialog is displayed. When no data is saved in memory, a dialog is displayed. 6GORQTCT[EQPFKVKQP /'/14;4GECNNUCXGFRCTCOGVGTU 3WKV 0QUCXGFFCVC If you want to keep the current adjustment, please press the ◄ button to quit. Otherwise the current adjusted condition will be lost by loading a data. • PICTURE MODE: Changes the PICTURE MODE (22). • FILTER RESET: Displays the filter time reset confirmation dialogue (39). • VOLUME+: Set the volume up. • VOLUME-: Set the volume down. Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button to execute the item. FAN SPEED  AUTO ADJUST  GHOST  FILTER MESSAGE  KEY LOCK SERVICE FACTORY RESET  I NFORMATION  REMOTE FREQ. FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. The HIGH is the mode for use at highlands etc. Note that the projector is noisier when the HIGH is selected. HIGH ó NORMAL (#052''& *+)* 014/#. (continued on next page) 40