Hitachi CP-X2 User Manual - Page 18
Adjusting the position, Using the automatic adjustment feature
UPC - 050585151079
View all Hitachi CP-X2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Operating Using the automatic adjustment feature 1. Press the AUTO button on the remote control. Pressing this button performs the following. AUTO For a PC signal The vertical position, the horizontal position, the horizontal phase and the horizontal size will be automatically adjusted. And the aspect ratio will be automatically set to default. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting. For an MIU signal The aspect ratio will be automatically set to the default. COMPUTER/ VIDEO STORAGE SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 POSITION MENU ESC ENTER RESET For a video signal, s-video signal or component video signal The video format best suited for the respective input signal will be selected automatically. This function is available only when the AUTO is selected for the VIDEO FORMAT item in the INPUT menu (30). The vertical position, horizontal position and aspect ratio will be automatically set to the default. For a component video signal, also the horizontal phase will be automatically set to the default. ● The automatic adjustment operation requires about 10 seconds. Also please note that it may not function correctly with some input. When this function is performed for a video signal, a certain extra such as a line may appear outside a picture. COMPUTER/ VIDEO STORAGE SEARCH Adjusting the position 1. Press the POSITION button on the remote control. The "POSITION" indication will appear on the screen. ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 2. Use the cursor buttons to adjust the picture position. When you want to reset the operation, press the RESET button on the remote control during the operation. To complete this operation, press the POSITION button again. Even if you do not do anything, the dialog will automatically disappear after a few seconds. POSITION MENU ESC ENTER RESET POSITION ● The POSITION button does not work for an MIU signal. ● When this function is performed on a video signal, s-video signal or component video signal, some image such as an extra-line may appear at outside of the picture. ● When this function is performed on a video signal, s-video signal, or component video signal, the range of this adjustment depends on the OVER SCAN in the IMAGE menu (27) setting. It is not possible to adjust when the OVER SCAN is set to 10. 18