Hitachi CP-X2 User Manual - Page 16

Operating Selecting an input signal (continued) 1. Press the VIDEO button on the remote control. Each time you press the button, the projector switches its input port as below. S-VIDEO VIDEO ● If the VIDEO button is pushed to switch from a signal from the COMPUTER IN port or an MIU signal, when TURN ON is selected for the AUTO SEARCH item in the OPTION menu (38), the projector will check the S-VIDEO port first. If no input is detected at the port, the projector will check the VIDEO port. VIDEO COMPUTER/ VIDEO STORAGE SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2 POSITION MENU ESC ENTER RESET Searching an input signal 1. Press the SEARCH button on the remote control. SEARCH The projector will start to check its input ports in order to find any input signals. COMPUTER/ VIDEO STORAGE SEARCH ASPECT AUTO BLANK When an input is found, the projector will stop searching and MAGNIFY ON HOME PAGE UP VOLUME display the image. If no signal is found, the projector will return to OFF END PAGEDOWN MUTE the state selected before the operation. FREEZE MY BUTTON KEYSTONE 1 2 COMPUTER IN  MIU  VIDEO S-VIDEO POSITION MENU ENTER Selecting an aspect ratio 1. Press the ASPECT button on the remote control. Each time you press the button, the projector switches the mode for aspect ratio in turn.  For a PC or MIU signal NORMAL  4:3  16:9  SMALL ESC RESET ASPECT COMPUTER/ VIDEO STORAGE SEARCH ASPECT AUTO BLANK MAGNIFY ON HOME PAGE UP VOLUME OFF END PAGE DOWN MUTE FREEZE MY BUTTON KEYSTONE 1 2  For a video signal, s-video signal or component video signal 4:3  16:9  14:9  SMALL POSITION MENU ENTER  For no signal 4:3 (fixed) ESC RESET ● The ASPECT button does not work when no proper signal is inputted. ● The NORMAL mode keeps the original aspect ratio setting. ● Performing the automatic adjustment initializes the aspect ratio setting. 16