Hitachi CP-X2 User Manual - Page 49

MIU Menu MIU Menu Remember that incorrect network settings on this projector /'07=%1/276'4? 5'.'%6 may cause trouble on the network. Be sure to consult with your network administrator before connecting to an existing access point on your network. Select "MIU" from the main menu to access the following functions. 2+%674' +/#)' +0276 5'672 5%4''0 126+10 /+7 '#5;/'07 .+8'/1&' 2%.'5524'5'06#6+10 5'672 G5*16 +0(14/#6+10 5'48+%'  Select an item using the ▲/▼ cursor buttons on the projector or remote control, and press the ► cursor button on the projector or remote control, or ENTER button on the remote control to execute the item. Then perform it according to the following table. See the User's Manual - Network Functions for details of MIU operation. NOTE • The factory default setting for DHCP is OFF. If your network has DHCP enabled, and needs to set IP ADDRESS, SUBNET MASK and DEFAULT GATEWAY automatically, please set DHCP to ON. ( 2.5.2 Network Settings of the User's Manual - Network Functions) • If you are not utilizing SNTP ( 2.5.7 Date/Time Settings of the User's Manual - Network Functions), then you must set the DATE AND TIME (51) during the initial installation. Item Description LIVE MODE Selecting this item sets the projector onto the "Live Mode". On the "Live Mode", the projector displays the images from the PC via Network, supported by "MIU Live Viewer". ( 1.1 Live Mode of the User's Manual - Network Functions) In the Live Mode, the message "Waiting for connection" will be displayed until the "MIU Live Viewer" start to send computer screen image. PC-LESS PRESENTATION Selecting this item displays the PC-LESS PRESENTATION menu. Using the menu is able to make the projector 2%.'5524'5'06#6+10 display the images stored in SD Memory Card or USB memory, and realizes a presentation without PC. ( 1.2 PC-LESS Presentation of the User' 6*7/$0#+. 5.+&'5*19 &+4'%64; &+52.#;5+