Hitachi FX77GII User Guide - Page 18

StarBoard FX-77GⅡ Introduction 1.4 Assembly and Setup When setting up the StarBoard, keep the following in mind: • Select a level and stable position. • Do not set it up near equipment that might generate electromagnetic waves and radio frequencies (e.g. radio transmitter, television, copying machine, air conditioner). • Avoid locations that are dusty, that are subject to extremely high or low temperature or humidity or that are exposed to direct sunlight. 1.4.1 Wall-Mounting Setup Method (1) Installing the Wall Attachment Rail. CAUTION Before installation, take the wall material into consideration. If it is installed by using a method inappropriate for the wall material, the board might fall. Also, installation might be impossible, depending on the wall selected. For details, consult your dealer. Before installation, take the wall strength into consideration. Before using the StarBoard, make sure that it has been fastened securely so that it will not fall. Furthermore, when installing the wall attachment rail, be sure that the rail is strong enough to support a weight of more than 40kg. If not, the product may fall from the wall. Decide the installation height of the board, and then install the wall attachment rail as shown in the diagram below. Fix to the wall using the screws etc Wall surface Fix to the wall using the screws etc. 1-7 English