Hitachi FX77GII User Guide - Page 28

StarBoard FX-77GⅡ Appendix 2.2 How to Use StarBoard in Projection Mode 2.2.1 Start Method(Windows version) (1) Connect devices following the page 1-12. (2) Power up the projector. (3) Power up PC to start up Windows. (4) Adjust the position of the projector so that the Windows screen projected by the projector is within the pen input active area (see page 1-5). (5) Select "Start" → "All Programs" → "StarBoard Software," or double-click the StarBoard icon on the desktop. If the "No connection" icon in below appears on the Tasktray, it means that the StarBoard is not connected. Make sure that the StarBoard and the PC are properly connected. Connected No Connection If the StarBoard is properly connected, the icon changes to "Connected" as above. If the icon does not change despite correcting the connection, there may be some other problem. For details, refer to "3. Appendix 3.1 Troubleshooting" on page 3-1 of this User's Guide. If the positions of the pen tip and cursor are out of alignment, select "MENU" on the StarBoard Software toolbar → "Settings" →"StarBoard" → "Calibrate" → "OK". and then perform position alignment. 2-5 English