Hitachi FX77GII User Guide - Page 24

StarBoard FX-77GⅡ Usage 2. Usage 2.1 Basic Usage In this chapter, the basic usage of the StarBoard will be explained. Read this section carefully to learn about the StarBoard functions. 2.1.1 Preparation Prepare to use the StarBoard. (1) Insert the battery into the electronic pen. CAUTION Be sure to install batteries correctly. Do not install batteries with positive and negative terminals reversed, or use batteries other than the type specified. It will cause pen malfunctions and excess heat, or burns to the hand. Be sure to provide insulation during disposal. Be sure to insulate the positive and negative terminals of the battery using cellophane tape, or similar material when disposing of batteries. Disposing of batteries without insulating them may lead to overheating, bursting, or ignition due to shorting, resulting in personal injury or fire. Furthermore, be sure to follow all local rules and regulations regarding proper battery disposal. If within the EU, be sure to follow Batteries Directive.[Batteries directive (2006/66/EC)] (1) Open the battery cover on the electronic pen by moving in the direction of the arrow. (2) As shown in the figure, insert the battery after verifying that the "+" side faces to the pen tip. (3) Replace the battery cover and slide it in the direction of the arrow until it closes completely. 2-1 English