Hitachi FX77GII User Guide - Page 29

StarBoard FX-77GⅡ 2.2.2 Start Method(Mac version) Appendix (1) Connect devices following the page 1-12. (2) Power up the projector. (3) Power up Mac to start up Mac OS. (4) Adjust the position of the projector so that the Mac screen projected by the projector is within the pen input active area (see page 1-5). (5) Select "Go" → "Applications" → "StarBoard Software" to start StarBoard Software. (6) Select "MENU" on the StarBoard Software toolbar → "Settings" → "StarBoard" → "Check Connection," and then check the connection. If the "StarBoard is not connected" message appears, StarBoard Software has not detected the StarBoard. Check whether the StarBoard and Mac are connected properly. Connected No Connection If they are connected properly, the "StarBoard is connected" message appears. If the indication does not change even though you have checked the connection, there is likely to be some problem. For details, see "3. Appendix Troubleshooting " on page 3-1 in this user's guide. If the positions of the pen tip and cursor are out of alignment, select "MENU" on the StarBoard Software toolbar → "Settings" →"StarBoard" → "Calibrate" → "OK". and then perform position alignment. 2-6 English