Hitachi FXTRIO-88W User Guide - Page 24
the space. - starboard fx trio 88w
![]() |
View all Hitachi FXTRIO-88W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
StarBoard FX-TRIO Series Introduction [3] Settle the board (The following work is necessary for FX-TRIO-88W.) 1. Make sure that the 2 wall-mount stabilizing sponges are touching the wall when the board is mounted on the wall. If either of the sponges do not touch the wall, apply the sponge mat (large) to the wall-mount stabilizing sponge, and adjust the space between the sponge and the wall. Wall-mount stabilizing sponge Remove the tape cover Sponge mat (large) Tape cover 2. Remove the tape cover and fix the board on to the wall. NOTICE When detaching the wall the paint might peel off from the wall and the doble-faced tape might remain on the wall by the adhesiveness of the double-faced tape's glue and the wall. Install the board at your own risk. About using Sponge mat (large) If there is space between the board and the wall, apply the sponge mat (large) to adjust the space. 1-10 English
![](/manual_guide/products/hitachi-fxtrio88w-user-guide-972a0d9/24.png)