Hitachi FXTRIO-88W User Guide - Page 31
How to Use
![]() |
View all Hitachi FXTRIO-88W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
StarBoard FX-TRIO Series How to use 2. How to Use 2.1 How to Use Touch Mode This section gives a basic description of how to use the board in touch mode. 2.1.1 Character Input To input characters, use your finger or the stylus that was provided with the product. NOTICE Use an input tool with a thickness of least 7 mm. When inputting to this product, use a tool that is at least 7 mm. If a pen or similar tool with a thickness of less than 7 mm is used, the input will be unstable. Also, do not use tools with a sharp tip, such as a ballpoint pen. If such a tool is used incorrectly, it could damage the surface of the board. - Using the stylus pen and Electronic pen Use the pen on the board with your body kept sufficiently away, so that your palm and elbow do not touch the board. If your hand or elbow touches the board, or you are within 1 cm of the board, it might cause an incorrect operation. 2-1 English
![](/manual_guide/products/hitachi-fxtrio88w-user-guide-972a0d9/31.png)