Hitachi FXTRIO-88W User Guide - Page 37
How to use, 3 Start Method
![]() |
View all Hitachi FXTRIO-88W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
StarBoard FX-TRIO Series How to use 2.3 Start Method 2.3.1 Start Method (Windows version) (1) Connect the devices with reference to the connection method on page 1-16. (2) Turn on the power switch of the projector. (3) Turn on the power switch of the PC to start Windows. (4) Adjust the position of the projector so that the Windows screen projected by the projector is within the input area (refer to page 1-5 of this User's Guide). (5) Select "Start" → "All Programs" → "StarBoard Software," or double-click the StarBoard icon on the desktop. If the "No connection" icon in below appears on the Tasktray, it means that the StarBoard is not connected. Make sure that the StarBoard and the PC are properly connected. Connected No Connection If the StarBoard is properly connected, the icon changes to "Connected" as above. If the icon does not change despite correcting the connection, there may be some other problem. For details, refer to "3. Appendix 3.1 Troubleshooting" on page 3-1 of this User's Guide. (6) Run "LsCamWiz.exe" located under "My Computer" → "C Drive" (*)→ "Program Files" →"Hitachi Software Engineering" → "FX-DUODriver", and adjust the sensor according to the instructions on pages 3-4. (*)This folder path may be changed since it depends on your Windows installation. 2-7 English
![](/manual_guide/products/hitachi-fxtrio88w-user-guide-972a0d9/37.png)