Honeywell 6272CSV User Guide - Page 10
System Troubles
View all Honeywell 6272CSV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
About the TouchCenter (cont'd) ITEM FUNCTION Arm MultiPartitions MORE CHOICES Press this button when you want to arm more than one partition. All partitions within the system can be armed at one time (if the user is so authorized). Note: This option may not be shown for some single partition systems. Press this button for more Security, Lighting, and TouchCenter setup features. System Troubles The "Arming" screen also displays an Icon(s) if a system trouble(s) occurs. The system trouble Icon is displayed to the left of the Panic button. If a trouble Icon is shown, contact your alarm company. The following Icons may be shown as applicable to your system: ICON MEANING AC Loss - The system is not receiving AC power. Bell Failure - The system bell or siren has a problem. Note: This Icon will be displayed when interfacing with residential panels only. Expander Failure - The system has a failure in an expansion module. Low Battery - The system battery, that powers the system during an AC power loss, is low. LRR Supervision Failure - The Long Range Radio used to communicate with the central station has a supervision failure Max Attempts Exceeded - The system has exceeded the maximum attempts to communicate with the Central Station. Pager Failure - The system cannot communicate with an assigned pager. Telco-1 Cut - The system is not able to communicate with the central monitoring station over the primary phone line. Telco-2 Cut - The system is not able to communicate with the central monitoring station over the secondary phone line. Note: Fault Icon(s) will scroll between all faults present on the system, if multiple faults exist. 10