Honeywell TD43996615 User Manual - Page 2

INTRODUCTION Thank you for selecting the Honeywell Long-Range Weather Forecaster with Wind Speed. This device combines precise time keeping with monitoring and displaying the wind speed information and temperature/humidity data from up to five remote locations. In this package you will find: • One main unit (receiver) TE852W • One three-channel remote temperature and humidity sensor (transmitter) TS33C • One Wind Speed Meter (transmitter) TS815 • Mounting Hardware with wrench tool for Wind Speed Meter • One User Manual Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know. STANDARD PACKAGE CONTENTS Picture Components Main Unit (receiver) Thermo Hygrometer Sensor (transmitter) Wind Speed Meter (transmitter) Consist of: Meter Arm, Meter Base and Wind Cups 4 screws and small wrench tool 3 Mounting hardware INSTALLATION The Honeywell Weather Forecaster with Wind Speed TE852W operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote weather sensors (transmitters). The remote weather sensors include a temperature and humidity sensor and wind speed sensor. All data measured by these remote sensors is transmitted to the main unit wirelessly, with the operating range in the open area from 100 feet (30 meters) for wind speed meter up to 328 feet (100 meters) for temperature and humidity sensor. Remote wind speed meter must be placed outdoors to measure and transmit a wind speed data. Remote thermo-hygrometer(s) can be placed indoors or outdoors, depending on the area where the temperature and humidity are intended to be measured. If you intend measuring outdoor temperature and humidity, place the remote sensor outdoors. NOTE: It is critical to assemble and power up all remote weather sensors BEFORE setting up the main unit. NOTE: It is critical to power up and test communication between the weather sensors and the main unit BEFORE permanently mounting them outside. 3 4