Honeywell TD43996615 User Manual - Page 4
Wind Speed Meter - security
UPC - 961613054432
View all Honeywell TD43996615 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
B. BATTERY COMPARTMENT • Holds two AA-size batteries C. RESET • Resets all previous settings D. CHANNEL SWITCH • Selects the desired channel -1,2 or 3 E. WALL-MOUNT RECESSED OPENING • Keeps the remote sensor on the wall F. °C/°F SWITCH • Selects the temperature display in Fahrenheit or Celsius NOTE: Install the batteries; select the channel and temperature in °C or °F before mounting the sensor. BATTERY INSTALLATION • Remove the screws from the battery compartment with a small Phillips screwdriver. • Set the channel 1 through 3. The switch is located in the battery compartment. Channel 1 is typically selected if only one remote sensor is being used. • Install 2 "AA" size alkaline batteries (not included) matching the polarities shown in the battery compartment. • Select the temperature unit in °F or °C by pressing °C/°F switch with a paper clip or similar tool • Replace the battery compartment door and secure the screws. • Secure the remote sensor in the desired location. MOUNTING • The remote thermo-hygrometer sensor can be placed on the flat surface or mounted on the wall in vertical position 7 • Use the wall mount hardware and screws when mounting the thermo-hygrometer sensor on the wall PLACEMENT • The remote thermo-hygrometer sensor should be placed in the area with a free air circulation and sheltered from the direct sunlight and an extreme weather conditions. • Ideally, place the thermo-hygrometer sensor above the natural surfaces (such as a grassy lawn). • Avoid placing the thermo-hygrometer sensor near sources of heat, such as chimneys and heating elements. • Avoid any areas collecting and radiating a heat from the sun, such as metal, brick or concrete structures, paving, patios and decks. • The international standard for the valid air temperature measurements is 4 feet (1.25meters) above the ground. OPERATION Immediately after batteries are correctly installed, the remote sensor will start transmitting a temperature and humidity data to the main unit. WIND SPEED METER FEATURES • Wind speed and wind gust measurement • Measurement of the temperature at the place of the wind meter • Remote transmission of the temperature, wind speed and gust data to the main unit via 433 MHz signal • Operating range of up to 100 feet (30 meters) • Wall or pole mount 7 8