Honeywell VISTA 15P Operation Guide - Page 5

SECTION 1 Features and Installation Highlights This manual applies to the following Honeywell security systems: ADEMCO VISTA-20P/ADEMCO VISTA-20PSIA/ADEMCO VISTA-20PCN (collectively referred to as VISTA-20P series), ADEMCO VISTA-15P/ADEMCO VISTA-15PSIA/ADEMCO VISTA-15PCN (collectively referred to as VISTA-15P series) Features and procedures apply to all, except where differences are noted. SIA Installations: The VISTA-20PSIA and VISTA-15PSIA are certified SIA-compliant controls that meet SIA specifications for False Alarm Reduction. The other controls described in this manual are not certified as SIA compliant, but can be programmed for False Alarm Reduction. To program for False Alarm Reduction, follow the SIA Guidelines noted in the applicable programming fields. Capabilities and Functions Feature/Function VISTA-20P Series VISTA-15P Series Partitions • 2 partitions, can protect two independent VISTA-15P is not a partitioned system. areas • Common zone option allows either partition to arm, while leaving a common area (ex. lobby or foyer) disarmed for access into the other partition. Zones Up to 48 protection zones plus 16 keyfob Up to 32 zones plus 8 keyfob zones (zones zones (zones 49-64) for total of 64 zones: 49-56) for total of 40 zones: • 8 basic hardwired zones (zones 1-8) with • 6 basic hardwired zones (zone 1-6) optional zone-doubling feature • Up to 16 additional wired zones (zones 9- • Up to 40 additional wired zones (zones 9- 24) using up to 2 4219/4229 modules 48) using up to 5 4219/4229 modules • Up to 26 wireless transmitter zones • Up to 40 wireless transmitter zones (5800 (5800 series; zones 9-34) series; zones 9-48) • Up to 2 configurable zone types • Up to 4 configurable zone types Security Codes Up to 48 Security Codes, with separate Up to 32 Security Codes, with separate authority levels and partition access authority levels One-button arming Dedicated keys can arm the system. Dedicated keys can arm the system. Schedules Up to 32; can control devices and/or auto- Up to 8; can control devices and/or auto- arm/disarm arm/disarm Keypad macros Up to 4; activated by wired keypads Up to 2; activated by wired keypads Paging Up to 4 pagers; certain system conditions Up to 2 pagers; certain system conditions can report to pagers; can use a dedicated can report to pagers; can use a dedicated key on keypads to send a signal to a pager key on keypads to send a signal to a pager Event Logging 100 events; display via Compass Downloader 50 events; display via Compass Downloader software or installer/master code at Keypad software or installer/master code at Keypad Zone descriptors Can assign for all zones (for alpha display keypads and/or 4286 Phone Module). Bell supervision Optional, detects external sounder wiring short (when in alarm) or open (when bell is off); causes a trouble condition, keypad display, and sends a report to the central monitoring station, if enabled. RF jam detection Optional, for wireless systems detects a condition that may impede proper RF reception (i.e., jamming or other RF interference); causes keypad display, and sends a report to the central monitoring station (if trouble reporting is enabled). Telephone Line Built-in option can monitor the telephone line voltage and can cause a local display, or a Monitoring display and trouble/alarm sound. Downloading via • Via Standard Phone Line: Use an IBM compatible computer, Compass downloading Phone Line or software, and a compatible HAYES or CIA modem specified by Honeywell. Internet • Via Internet: supports Upload/Download via the Internet/Intranet when used with an appropriate communications device (ex. 7845i-GSM) and Compass downloading software. This allows site maintenance independent of central station monitoring, and modification to sites globally via the Internet. UL NOTE: Uploading/Downloading via the Internet has not been evaluated by UL. 1-1