Honeywell W7006A Owner's Manual - Page 25
Configuring Security-Lifestyle Associations, Configuring Telephone Settings
View all Honeywell W7006A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Product Release Version 3.x.x. To change the security user code: To change the remote access code: Home Controller Gateway User Guide Both codes must be four digits, using only the numerals 0-9. You may use the same four digits for both the security user code and the remote access code. If you forget either password (security user code or your remote access code) call your system installer. The user code for the security system is programmed directly into the Ademco security panel. Refer to Security System User's Manual for instructions. On the System Configuration page of the MyHome Portal Web site: 1. Select Passwords in the Show settings for list. 2. Type in the existing access code in the first box. 3. Type the new access code in the second box. 4. Re-enter the new code in the third box. 5. Click the Apply button. Configuring Security-Lifestyle Associations To change the security associations: If your Home & Away System installation does not include a security system, disregard the Security Settings configuration page. Each security level (such as Arm, Disarm, Instant, Stay, and Max) may be assigned a Group (such as Home, Sleep, Away, Custom). If an assignment is made, a Lifestyle will be activated each time its associated security level is activated. For example, if the Sleep Lifestyle is assigned to the security level, Instant, each time security is changed to Instant, the Sleep Group will automatically be activated. This means the Sleep Lifestyle overrides any other Lifestyles or Schedules that are currently active. 1. On the System Configuration page select Security in the Show settings for list. 2. Select a Group from the pull-down list next to a security level shown on the right 3. Click Apply. Configuring Telephone Settings If you have an answering machine or answering service from your telephone company, we recommend you set the Home Controller number-of-rings-before-pick-up to be twice the number-of-rings-before-pick-up that is used by the answering machine/service. See the table below for suggested settings. (It is recommended that you have a telephone setting of at least 3.) The maximum setting is ten. If the number of rings is set to zero, the telephone answering function is disabled. Answering machine/service call pick-up setting 1 2 3 4 5 6 7 Suggested Home Controller telephone setting 3 4 6 8 10 10 10 21 69-1321-2