Honeywell W7006A Owner's Manual - Page 28
Security Conflicts, Power Failures, Computer or Internet Failures
View all Honeywell W7006A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Home Controller Gateway User Guide Product Release Version 3.x.x Security Conflicts About not-ready zones: About exit delay periods: If any zones are not ready when you try to arm the system, you will receive an error message. Your home can be armed from the Web, phone, and Wall Panel SUI only if all zones are ready for arming. To arm a system with not-ready zones you must set your system to bypass the zone. When arming the security system, your home will not be secure until the exit delay period expires. (The exit delay period was programmed at the time of installation. It will be set between 0 and 255 seconds.) To ensure your home is protected, verify this update occurred before logging off the Web. After the exit delay expires, the Home and Security pages of the Web will display the new security state. If you have changed security state over the phone, wait until you hear confirmation that the system is in "exit delay" before hanging up. To ensure security was changed correctly, call back into the Home Controller after your exit delay period has ended. Power Failures In the event of a power failure, the Home & Away Controller saves all Lifestyle, Schedule, and configuration settings. NOTE: If you manually change the state of lights or appliances while the power is off, the Controller does not recognize the new state when power is restored. For example, the Controller interfaces may show a light as on when it is actually off. However, when a new Lifestyle or Schedule is activated, the Controller resets the device to the expected state. Computer or Internet Failures If your computer crashes, the Home & Away System continues to run normally because it is not installed on your computer drive. In the event the Internet connection is lost, you will not be able to log into the Web interface from outside the home. If you have a computer in your home, you will still be able to interact with the system through the Web interface. Follow instructions from your ISP to re-establish the Internet connection. 69-1321-1 24