Hotpoint HDA3600RBB Installation Instructions - Page 3

Installation Preparation - Enclosure PREPARE DISHWASHER ENCLOSURE WARNING To reduce the risk of shock, fire, or injury to persons, the installer must ensure that the dishwasher is completely enclosed at the time of installation. • The dishwasher must be installed no more than 10 feet from sink for proper drainage. • The dishwasher must be fully enclosed on the top, sides and back. • The dishwasher must not support any part of the enclosure. ADVERTENCIA Para reducir el riesgo de choque, incendio o lesión a personas, el instalador se debe cerciorar de que la lavadora esté #282 French completamente cerrada en el momento de la instalación. Countertop Dishwasher Clearances: In a corner installation, provide at least 2" clearance between the dishwasher and the adjacent cabinet, wall or other appliance. Provide at least 27" of clearance in front of the dishwasher. • The rough cabinet opening must have a minimum width and depth of 24" and height of 34-1/2" ± 1/4" from the floor to the underside of the countertop. • #T2h8#22e8F2rbeFnracehncchk wall should be free of pipes or wires. • Adjacent cabinets should be square and plumb to ensure a good fit. Refer to Figure A. • For a corner installation, allow 2" minimum clearance between the dishwasher and the adjacent wall. • Provide at least 27" in front of the dishwasher to allow the dishwasher door to open fully. Refer to Figure B. Figure B 27" Minimum 2" Minimum 05A-1183F Figure A • Make sure the floor is level inside the opening and even with the finished floor of the kitchen. This will facilitate removal of the dishwasher at a later date for service, if needed. 3