Hotpoint HDA3600RCC Installation Instructions - Page 2

PARTS SUPPLIED IN INSTALLATION PACKAGE: [] Two 8-18 x 5/8" Phillips-head wood screws [] Junction box cover and #10 hex head screw [] Drain hose (78" long)and hose clamp [] Cord protector (Power Cord Models Only) [] Conversion leads (Power Cord Models Only) [] Literature, product samples and/or coupons Screw Kit #8 Phillips-Head Wood Screws 5/8" long He× Head #10 Junction Box Screw 1/2" long Junction Box Cover 78" Drain Hose Hose Clamp Cord Protector {Power Cord Models Only) Conversion Leads {Power Cord Models Onlg) MATERIALS YOU WILL NEED: [] WX09X70910 power cord if applicable to your installation [] UL-Listed wire nuts (3) [] Thread seal tape [] 90 ° elbow, ferrule and compression nut- (3/8" NPT external thread on one end and opposite end sized to fit water supply) [] GPF65 Side-mount bracket kit for use with granite countertops FOR NEW INSTALLATIONS: [] Electrical cable [] Water line-S/8" minimum copper tubing [] Strain relief for electrical connection [] Hand shut-off valve (recommended) [] Air gap for drain hose, if required [] Waste tee for house plumbing, if applicable [] GPF10S drain hose (10' long), if needed [] Screw-type hose clamps Electrical Cable or WR09×70910 Power Cord 3 Wire Nuts Hot Water Line-3/8" Minimum Copper Tubing Strain Relief Thread Seal Tape Shut-Off Valve 90 ° Elbow, Ferrule and Compression Nut Optional 10' GPF65 Side-Mount Bracket Kit Air Waste Tee Drain Hose GPFIOS Gap Screw-Type Hose Clamps TOOLS YOU WILL NEED: [] Safety glasses [] 1/4" and 5/16" nutdrivers [] Flashlight [] Gloves [] Adjustable wrench (6") [] Phillips-head screwdriver [] Measuring tape [] Level [] Carpenter's square [] Bucket to catch water when flushing water line [] Tubing cutter [] 15/16" socket wrench FOR NEW INSTALLATIONS: [] Hole saw set [] Drill and appropriate bits Safety Glasses 1/4" and 5/16" Nutdrivers Flashlight Adjustab e _ Wrench Phillips-Head Screwdriver Hole Saw Set Measuring Tape Bucket Level TUbing utter Carpenter's Square 1S/16" Socket Wrench